Housing subdivision design and permits
For landowners and new property developers. Our lawyers, architects, engineers, surveyors, accountants and marketers take you from layout to permit.
What is a housing subdivision
Selling land split into 10 or more plots, whether from one plot or several adjoining plots, requires a subdivision permit first. The project must provide utilities such as roads, water and electricity, and common areas of at least 5% of the saleable area.
Scope of work
- Advice throughout the project, or full management on the owner's behalf
- Boundary survey of the project land and a layout that maximises saleable area
- Utility design, drainage calculations and construction cost estimates
- Permit documents with layouts certified by a licensed architect and civil engineer
- Filing with the Land Office and other agencies, and follow-up until the permit is issued
- Subdivision into individual title deeds after approval
Minimum plot sizes by house type
| Type | Requirement |
|---|---|
| Detached house | Width and depth at least 10 m and area at least 50 sq. wah (60 sq. wah if either side is shorter). The house must be at least 2 m from every boundary |
| Semi-detached house | Width and depth at least 8 m and area at least 35 sq. wah. At least 2 m from the non-shared boundaries and a 3 m front setback |
| Townhouse | Frontage at least 4 m and area at least 16 sq. wah. 3 m front setback, 2 m from the rear boundary, and spacing between buildings as required by building control law |
Requirements can differ according to each provincial land subdivision committee.
Advertising land for sale as a subdivision before the permit is issued is prohibited. Read the land clinic answer on this
Have land for a project? Start with a conversation
Send your deed and project idea on LINE. We assess feasibility and project size for free.